High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is a challenging issue for owners. From the desired temperature to their favorite light level, guests will probably return for an additional stay when they can customize their room to match their preferences. However, providing these characteristics using old technology wastes lots of energy. As an example, there are plenty of issues with the old card key switches. Guests can put any card in the old switches, or they may ask for more than one card. Even though hotel desk refuses to offer more than one card to a guest, she/he might claim to have lost the card.
The conventional old technology of hotel card switch. There is also a large amount of over intake of lights and AC energy due to things running even if guests aren’t in their rooms, and also this may cause a financial loss for your owner. Needless to say, no hotel owner wants to prohibit guests from possessing a comfortable stay, nor do owners expect guests to get in a dark or cold hotel room. Nobody is to blame. Both guests and hotel owners have the authority to fulfill their interests.
Some hotel owners think if they separate the AC through the main network, less energy will be consumed, and some believe that motion sensors would be the solution. However, these approaches fail to resolve the issue. The AC is the most energy-consuming device of all, and motion sensors could be nightmares given that they only function according to movement detection, which means that the AC and lights might go off while a guest is sleeping or reading a magazine. Nightmarish!
The TIS Automation Company offers the best solution for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with its ability to detect human presence in a room. This ceiling-mounted sensor has several options, including a PIR motion sensor, an easy harvest sensor, 2X digital inputs, infrared emitters compatible with all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the brand new way for hotel economical technology. By installing this door sensor in the entrance to your room, connecting it towards the Energy Servant’s digital input, and programming the logic lines, the situation of room occupancy is entirely resolved.
The following logics can be defined for this particular sensor to manage room energy without the discomfort for guests:
Logic 1: If you have any movement within the room, the occupancy mode will be on.
Logic 2: In the event the main door is closed and opened, a flag will turn on for just one minute to see if there is certainly movement in room. If no movement is detected after 1 minute, the system will activate energy-saving mode. This can be valuable in situations when a guest enters the space briefly. In energy-saving mode all lights are off with the exception of a nightlight, which stays on for three hours just in case there is another guest having a nap. Also, the AC will not be turned off, but its temperature will be decreased by 2 degrees. This helps save energy over time.
Logic 3: If the energy-saving mode is enabled without any movement is detected for more than 3-5 hours, the nightlight and AC will be turned off automatically. It is additionally possible to define lower temperature levels for the AC. Additionally, the power Servant can change the AC on/off if this recognizes that a balcony window/door is open. All this requires is adding a magnetic contact linked to the balcony window/door and programming the required smart decision. The sunshine harvest sensor helps save energy by wscgid balcony lights off if there is enough sunlight.
Another practical and beneficial capability of this sensor is its built in thermostat, that helps retain the right temperature at all times. This is important to keep furniture fresh and intact. Also, in hot spots and even if the room is empty for a long period, humidity and bad smells will not become a problem within the room. This sensor could be programmed to alter AC to dry mode in the event the room temperature reaches or exceeds 28-30C degree. This may happen several times in the daytime if needed. An identical performance can be programmed in cold spots to avoid mold.
Another option of this smart device is TV control. If the hotel provides the guest having a room tablet, she/he is able to control the room’s TV by using it. This sensor was set up in 20 rooms in the Fairmount Blue Mountain Hotel in Sydney. The end result was considerably enhanced energy management and many satisfactory comments from guests who enjoyed their luxurious stay in this hotel.
TIS offers the opportunity to meet both hotel owners and guests interests and requires with only a few items and then in probably the most energy efficient possible way. To learn more or even to schedule a consultation, call us at www.tiscontrol.com